Results 1 to 4 of 4
  1. #1

    A Question on electrics

    Sorry this is off topic as it's not one of the Kats.

    I was working through one of the bikes with an electrical issue and came across the following symptoms. When I removed the sparkplugs to check for spark I only had spark on #4. 1, 2 and 3 had no spark. Running through the tests in the workshop manual I had power to coils, power to CDI, continuity between CDI and coils, continuity between all the relevant connectors in the loom, the pulse coil checked out per the book as did the CDI connections. But when I got to testing the secondary coil through the spark plug leads the resistance was outside spec on both coils. Does this mean I have duff coils?

    The symptoms were:
    The bike ran when I reassembled it. After about a week it then stopped. The plugs are new and there is fuel in the carb bowls. I know it is spark related cause when I sprayed starting spray in the airbox nothing happened.

    Thanks in advance.
    Gone riding!

  2. #2
    which eurotrash nightmare? (what bike)

    you could check the high tension leads and coils separately..

    "But what would I know, I cant even diagnose a vacuum leak"

  3. #3
    That was the next test...….

    It's a Hooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo onda...……………...
    Gone riding!

  4. #4
    4 individual coils I'm guessing?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts